Page 1 of 1
Banjo Bolt Specs (Solex)
Posted: Thu Jul 07, 2022 6:05 pm
by glorymotorworks
Would the owner of a Solex carb mind popping the banjo bolt out and sending the thread size and measurements?
Thanks for your time.
Glory Motorworks
glorymotorworks@gmail.com
323-454-7650
Re: Banjo Bolt Specs (Solex)
Posted: Wed Jul 20, 2022 4:31 pm
by FPassmore
Hi, Just bought a couple recently so you are looking for 12mm x 1.25TP (ISO fine) with standard length of 30mm although some have made theirs 6-8mm longer which helps get down deeper into unused threads and allows for fibre washers at the bracket.
Frank
Re: Banjo Bolt Specs (Solex)
Posted: Mon Jul 25, 2022 9:39 pm
by glorymotorworks
Thanks Frank - really appreciate it. Looks like ours has been modified, but it's good to have the original specs.
Katie
Glory Motorworks