Ariel Motorcycle Club North America Forum

I have restored this to 98%. And then I got a job overseas. So here is a good deal going to the club members first and then Ill put it on ebay. Engine torn down gone through. sludge traps cleaned and new connecting rods along with bushings and bearings. new cam and morgo oil pump. Top end honed and ...

If you need parts for the oil rocker line or gauge these guys carry it.
solder pipe nipples and equal ended unions.
An hour to do the job and two weeks of internet searching.
vintagecarparts.co.uk
Merry Christmas all

As always thanks for the quick reply Phil. The set up I have on the 51 is a 1/8 line to feed the oil pressure gauge that you say is absent on later models, and a 3/16 line to the rockers. The fix is to swap the lines and thus reduce the oil flow from the Morgo pump from over oiling the head. As ther...

Has anyone who has installed the morgo oil pump, switched the rocker oil feed line with the oil pressure gauge.
Seem some posts about this on the brit forum. If you have let me know what you did.
thanks greg

51 SQ four the rear brake has a large spring attached to the brake pedal casting, causing the brake pedal to be very high in relation to the foot peg. Something is off with this set up. My brake rod goes down under to the rear brake and I have seen a few photos of the brake rod going up to the rear ...

If anyone needs Square four connecting rods, these folks in Florida are the ones making them for the British club and Drags
https://www.rrconnectingrods.com/

Thanks will look into it.

Been doing some reading and there seems to be a mixture of oil and grease in the gearbox.
Any idea what owners use nowadays?
Thanks for any info.

Hi all
I have tried using the emails on the AJ lewis web site for mike Addeo and no luck yet.
does any one know if its a dead site or is there a phone number. Looking for parts
thanks.