Ariel Motorcycle Club North America Forum

Information on Solex carbs even with the factory brochure is not very informative. Does anyone have advice on setting up the choke? Appreciated if there is.

I am looking for information on whether the factory supplied a stop light switch as standard for the Mk 1 Square Four. Also on the oil tank oil level decal. What type was used. If anyone can help greatly appreciated.

I ordered a chrome dome for my 51 Square Four some months ago. It finally turned up only to find the I made a one digit error in the part number. The part number I submitted was 5702-36 which is the number for a 1936-38 Ariel single dome. The number for the one I want is 5702 37!! Before returning t...

Front brakes on a Mk I are good, but could really do with support from the back brake. I am still looking for a brake arm for a 1951 Mk I Square Four. Any help will be appreciated. cording@shaw.ca

Many thanks frank, fingers crossed as this is the last part needed to complete an "original" resto.

Tony

Hi, Canada calling, in the final stages of a full restoration of a '51 Mk I Square, and am in need of a rear brake arm and return spring. The brake arm is the kind that points down if that makes sense. Contact at cording@shaw.ca will be appreciated.

My '51 Mk 1 is on the cusp of being ready for fire up, but I am missing the pressure relief valve body, spring and ball bearing. If any kind soul has a spare it would be well appreciated. Contact Tony at cording@shaw.ca. Thanks for looking.

First off many thanks to Mr. Turrall for responding to my previous questions. The fitting of knee pads to my '51 has me baffled. I have tried but so far have got to the 3/4 mark but no further. Does the steel plate have a washer behind, and is there a tried and true method for easy slip on? Many tha...

Hi Canada calling again. I do not have a clutch push rod, can anyone let me know correct length. Many thanks. Tony

Thanks that is very helpful and what I was anticipating. On another topic, just discovered to day my clutch pushrod is not the correct one, and is too short. Does anyone know the correct length? Appreciate the help.